PB-5 / PBE-5 / PBC-5
PB-5 / PBE-5 / PBC-
5 Operator’s Manual
12
3.3. Installing the motor
When you use the air motor, put it into the machine (
1
, Fig. 4) so that the arbor is in
the socket (
2
). Then, rotate the motor to the left (
3
) to tighten.
To attach the electric/battery motor, put the clamping ring (
4
) onto the machine.
Attach the correct driver (
5
) to the motor. Put the motor into the machine (
6
) so that
the arbor is in the socket (
2
). Then, use the 6 mm hex wrench to tighten the clamping
ring (
7
).
In the electric motor, set the rotation direction switch as shown in Fig. 1. In the
battery motor, set the rotation direction switch and the operation mode switch as
shown in Fig. 1.
Fig. 4.
Installing the air, electric, and battery motor
1
2
3
5
5
6
7
5
4
5
5