D300XT
D300XT Operator’s Manual
12
3.3. Installing and removing the annular cutter
Install the arbor as described before. Use gloves to put the correct pilot pin into the
annular cutter (
1
). Use a dry cloth to clean the cutter. Put the cutter into the arbor (
2
)
to align the flat surfaces (
3
) with the screws (
4
). Use the 5
mm hex wrench to tighten
the screws.
To remove the cutter, loosen the screws (
4
) with the 5
mm hex wrench.
1
2
4
3
