D300XT
D300XT Operator’s Manual
10
3.2. Installing and removing the arbor, MT3 twist drill bit, or
tap chuck
Unplug the power cord and lift the chip guard (
1
). Rotate the handles to the right (
2
)
to lift the motor. Use a dry cloth to clean the spindle and the arbor (drill bit, tap
chuck). Use gloves to put the arbor (drill bit, tap chuck) into the spindle (
3
). Make
sure that the stop rod is between the pin and the fitting (
4
). If the arbor (tap chuck)
has a nut (
5
),
tighten the nut to the spindle.
1
2
3
5
4
