BM-20 plus
BM-
20 plus Operator’s Manual
14
Fig. 7.
Changing the cutting inserts between the milling cutters
3.4. Replacing the milling cutters
Unplug the machine from the power source and remove the cover of the milling
cutters as shown in Fig. 5. Use the 26 mm flat wrench to prevent the turn of the
spindle. Then, use the 8 mm hex wrench to remove the screw, and remove the
milling cutters (Fig. 8). To install, put the cutters on the key.
The 26 mm flat wrench and the 8 mm hex wrench are not included in standard
equipment.
Fig. 8.
Replacing the milling cutters
Key
