ELEVATION BULL NOSE FRONT BUMPER
2009-14 FORD F150
Page 1 of 7
PARTS LIST:
1
Front Bumper Assembly
24 12-1.75mm x 50mm Hex Bolts
1
Driver/Left Frame Mounting Bracket
48 12mm x 37mm x 3mm Flat Washers
1
Passenger/Right Frame Mounting Bracket
4 12mm Lock Washers
1
Driver/Left Top Support Bracket
22 12-1.75mm Nylon Lock Nuts
1
Passenger/Right Top Support Bracket
2
8-1.25mm x 25mm Hex Bolt
1
Driver/left LED Light Brackets
2
8-1.25mm x 16mm Hex Bolt
1
Passenger/right LED Light Brackets
6 8mm x 24mm x 2mm Flat Washer
1
Winch Access Cover
4 8mm Lock Washer
5
6mm Button Head Combo Bolt
2 8mm Hex Nut
1
4mm Wrench
6 6mm x 25mm Hex Bolts
2
Plastic Plugs for license plate mount
12 6mm x 18mm x 1.6 Flat Washers
2
12mm Double Nut Plates
6 6mm Nylon Lock Nuts
2
12-1.75mm x 160mm Hex Bolts
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. BUMPER IS HEAVY, ASSISTANCE IS HIGHLY
RECOMMENDED TO AVOID POSSIBLE INJURY OR DAMAGE TO THE VEHICLE.
1.
Remove the license plate and bracket. Open the hood and remove the hardware attaching the hood
release lever to the steel bracket attached to the back of the bumper,
(Figure 1)
. Also remove the
screws attaching the back of the plastic facia to the hood release bracket. On models with factory fog
lights, unplug both lights and release the wiring harness from the clips attached to the back of the
bumper. Move harness away from bumper.
2.
Place blocks or jack stands under the front bumper to support it during mounting bolt removal. Once the
bumper has been safely supported, remove the (2) large hex nuts from the back of each bumper
bracket,
(Figure 2)
.
WARNING!
Assistance is required to hold the bumper in place during bolt removal
to prevent the bumper from falling. Carefully slide the bumper off over the tow hooks, if equipped. Next,
remove the air dam from the bottom of the frame, if equipped,
(Figure 3)
.
Winch Tray
(2) License Plate
Plugs
(2) Double Nut Plates
Passenger/Right
Frame Mounting
Bracket
Driver/Left Frame
Mounting Bracket
Passenger/right
Support Bracket
Driver/left Top
Support Bracket
Left/Right “L”
LED Brackets
