Operating and adjusting
_______________________________________________________________
8
134917
5
Operating and
adjusting
5.1
Safety instructions
The
Universal Lockers
product should only be
used and operated in faultless condition and in
compliance with the instructions in the operating
manual.
Prior to storing objects in the Universal Lockers
product:
■
Ensure that the Universal Lockers product has
been assembled in accordance with the
provided assembly instructions.
■
Ensure that the maximum permissible load-
bearing capacity of the Universal Lockers
product is not exceeded.
Risk of injury and damage.
When loading the assembled Universal
Lockers product or its accessories with a
weight higher than the approved weight,
the fastening screws may tear.
Comply with the permissible weight.
CAUTION
Possible damage to the Universal
Lockers product.
Check that the Universal
Lockers product has been
properly assembled and
mounted.
5.2
Opening and closing the
lockers
Further detailed information regarding
use, resetting or servicing the locks can
be found under
www.steelcase.com ->
Design Resources-> Documents ->
Search for: Lockers Collection
.
5.2.1
If shared:
Locking:
Fig.: 5-1: Shared user code
1a
Close door.
Press
C
.
Enter a 4 to 7 digit code.
Press
key
.
1b
Turn the
switch
clockwise to the
“closed” position.
Fig.: 5-2: Master key
1a
Close door.
Insert valid master key.
1b
Turn the
switch
clockwise to the
“closed” position.
Fig.: 5-3: RFID card
1a
Close door.
Press
key
and hold RFID card in front
of sensor.
