Steelcase Montage Wood Selections Скачать руководство пользователя страница 1

Страница: 1 / 4

Steelcase, Inc.

Grand Rapids, MI 49501

U.S.A.

1-8

88-783-3522

Y9501922

Assembly Directions

Printed in U.S.A.

Tools

Montage Wood Selections

Rev.

- Bullet Top Worksurfaces

- P-Top Worksurfaces

- Sock Top Worksurfaces

- Scoop Top Worksurfaces

BULLET TOP WORKSURFACE

(Refer to page 2)

P-TOP WORKSURFACE

(Refer to page 3)

SCOOP TOP WORKSURFACE

(Refer to page 4)

SOCK TOP WORKSURFACE

(Refer to page 4)

GAP

IMPORTANT:

Be certain to maintain a

1/8" (3.2mm) gap between worksurfaces.

Содержание Montage Wood Selections

Страница 1: ...ons Rev D Bullet Top Worksurfaces P Top Worksurfaces Sock Top Worksurfaces Scoop Top Worksurfaces BULLET TOP WORKSURFACE Refer to page 2 P TOP WORKSURFACE Refer to page 3 SCOOP TOP WORKSURFACE Refer to page 4 SOCK TOP WORKSURFACE Refer to page 4 GAP GAP GAP GAP IMPORTANT Be certain to maintain a 1 8 3 2mm gap between worksurfaces ...

Страница 2: ...oft clean surface Attach base assembly Break tab on corner support bracket and bend tab on cantilever bracket as shown Attach bracket to cantilever and insert support bracket Lower worksurface onto supports and secure with screws provided Height may be adjusted by turning column Use predrilled holes in underside of top Y9501922 Rev D 1 1 BEND TAB DOWN BREAK TAB OFF ...

Страница 3: ...3 of 4 Steelcase TO ATTACH WORKSURFACE TO ANOTHER WORKSURFACE AT 90 Locate brackets on underside of worksurfaces as shown Secure brackets with screws provided Height may be adjusted by turning column BOTTOM VIEW FLUSH MOUNT BRACKETS Y9501922 Rev D ...

Страница 4: ...ED CANTILVER 1 1 BEND TAB DOWN BREAK TAB OFF 1 2 3 4 Break bend tab on corner support bracket and tab on cantilever bracket as shown Attach bracket to cantilever and insert support bracket Lower worksurface onto supports and secure with screws provided Height may be adjusted by turning column Y9501922 Rev D ...