Steelcase
85
Appendix 1: ēno Bluetooth pairing options
4. Click the Bluetooth Devices icon.
5. Select the “Devices” tab and click the “Add” button. This will launch
the “Add Bluetooth Device Wizard.”
6. Click the box that indicates that “My device is set up and is ready to
be found” and click “Next.”
7. You will see a list of all Bluetooth devices. Click the item listed as
“ADP-301” followed by an associated Bluetooth address.
8. Enter the passcode, which is “0109”.
9. Repeat these steps to pair additional styli to this computer.
Note that you can pair multiple styli with one computer, but a stylus can be
paired with only one computer at a time.
Pairing ēno using third-party Bluetooth
It is possible to use a third-party Bluetooth solution on your computer to
pair the ēno stylus but not recommended for optimum performance:
1. Launch the software that comes with your third-party Bluetooth
capability. It may launch from:
•
The control panel
•
An option in the start menu/programs menu.
•
A Bluetooth icon in the taskbar or system menu bar.
2. Turn on the ēno stylus by removing the cap.
3. Locate and start the mechanisms for pairing, such as one of the
following:
•
Add a Device
