Steelcase
83
Appendix 1: ēno Bluetooth pairing options
Appendix 1: ēno Bluetooth pairing options
The ēno stylus automatically pairs with the ēno receiver (a black USB
device), enabling you to move the receiver to another computer without
unpairing and pairing the stylus again. The host computers must have the
ēno App version 3.0 or higher installed. Pairing only needs to occur once,
and even changing the ēno stylus battery will not unpair the stylus.
The ēno receiver automatically pairs with the ēno stylus when you press the
pairing button on the top of the ēno receiver. Remove the cap from the ēno
stylus to turn it on first, then press the pairing button on the receiver. The
ēno receiver’s LED will indicate whether or not the pairing was completed
successfully:
•
If pairing is successful
: The receiver’s LED will quickly flash green five
times (more quickly than the initial pairing pattern) and will then turn solid
blue.
•
If pairing is not successful
: The receiver’s LED light will quickly flash red
five times.
If pairing was not successful and the receiver LED flashes red, try to resolve
the problem by removing the ēno receiver from the computer USB port,
waiting five seconds, and reinserting the receiver before attempting the
pairing process again.
With the previous version of the PolyVision Bluetooth adapter (a gray USB
device), the ēno stylus must be paired with one host computer at a time.
This appendix covers alternative Bluetooth pairing scenarios that are
possible but not recommended for optimum performance:
•
manually pairing the stylus to the computer using the ēno App
•
pairing with the host computer’s built-in Bluetooth capability rather than
using the Steelcase receiver
•
pairing with host computer using third-party Bluetooth capability
