Steelcase
36
Preparing to use ēno
6. Click the drop down menu beside “Board responds to Icon Strip ID”
and choose the option that corresponds to the magnetic icon strip
labeled “A,” “B,” or “C” on that board. Choose “All” when you want
all whiteboards to respond to all icon strips or when only one
whiteboard is used.
7. Repeat for up to two additional ēno interactive whiteboards with
projectors connected to the computer.
The calibration between the whiteboard and the projected computer
desktop is important and may require adjustment on each whiteboard
separately. To calibrate multiple whiteboards:
1. Click the ēno App icon in the system tray (Windows) or menu extras
(Macintosh).
2. Choose “Align (Calibrate) the Display” from the menu.
3. Choose the display option that corresponds to the magnetic icon
strip labeled “A,” “B,” or “C” on that whiteboard.
4. Follow instructions you see projected from the computer to the
whiteboard. Refer to “Calibrate the computer with the whiteboard”
on page 30.
