Steelcase
26
Preparing to use ēno
To install the battery:
1. Open the battery compartment.
2. Insert the battery.
3. Replace the battery compartment lid.
Power on and off the stylus
Communication between the stylus and host computer takes place when
you remove the stylus cap. To turn the ēno stylus on and off:
•
Remove and replace the stylus cap.
note:
NOTE:
When the stylus is not in use, replace the cap to extend battery life.
Pair the ēno stylus with the ēno receiver
Related topics:
“ēno receiver LED status summary and troubleshooting”
The ēno receiver connects to the host computer’s USB port and pairs the
Bluetooth signal with the ēno stylus. You can pair up to three ēno styli to
one ēno receiver. Refer to “Multiple ēno users” on page 34.
