Steel City 40285, Руководство пользователя, Страница: 8 / 36

6
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust
preventative oil from unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner
or denatured alcohol.
These items are coated and must be cleaned:
1. Cutterhead
2. Feed Rollers
3. Table
4. Table Ways
Gasoline and petroleum products have low flash points and could cause an explosion or fire if used to clean
machinery.
DO NOT use gasoline or petroleum products to clean the machinery.
WARNING:
CAUTION:
WARNING:
Many of the solvents commonly used to clean machinery can be toxic when inhaled or ingested. Lack of
ventilation while using these solvents could cause serious personal health risks or fire. Take precautions
from this hazard by only using cleaning solvents in a well ventilated area
.
UNPACKING AND CLEANING
CLEAN UP
The unpainted surfaces are coated with a wazy oil to protect them from corrosion during shipment. Remove this
protective coating with a solvent cleaner or citrus-based degreaser. To clean, some parts may need to be removed.
For optimum performance from your machine, make sure you clean all moving parts or sliding contact
surfaces that are coated.
Avoid chlorine-based solvents, such as acetone or brake parts cleaner, as they may
damage painted surfaces should they come in contact. Always follow the manufacturer’s instructions when using any
type of cleaning product.
DO NOT use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your machine.
After cleaning, cover the unpainted surfaces with a good quality household floor past wax.