Steel City 20130VS, Руководство пользователя, Страница: 9 / 16

8
ADJUSTMENT
TABLE ADJUSTMENT
A. Tilting adjustment: Loosen the lock bolt, then swing the table to appropriate position and re-tighten the lock bolt.
B. Swing 360°: Loosen the table bracket’s locking handle, then swing the table to the appropriate position and re-tighten
the locking handle.
FEED DEPTH ADJUSTMENT
Turn the depth scale ring to the needed depth, then lock the scale ring in place with the depth knob (1).
The drill bit will stop after traveling the selected distance on the depth scale.
Otherwise you can read the depth from the digital depth display.
A B
SPEED ADJUSTMENT
This drill press can change speed by
rotating the handwheel. You can read
the speed from the digital speed display.
QUILL SPRING ADJUSTMENT
The quill return spring may need adjustment
if the tension causes the quill to return too rapidly
or too slowly. Take out the screw and carefully
turn the spring cap counterclockwise, then attach
the screw to the other hole of the spring cap.
1
DIGITAL DEPTH DISPLAY
DIGITAL SPEED DISPLAY
SPEED HANDWHEEL
SPRING CAP
SCREW
Change the speed
only while the machine is running!
WARNING: