Steel City 20130VS, Руководство пользователя, Страница: 7 / 16

6
MACHINE PARTS
Unpack carton and check your machine to see parts listed below:
.
1. Head assembly
2. Accessory bag
Feed handles
# 1
3
Chuck tool 1
1
1
1
1
Arbor
Chuck
Chuck key
7. User manual 1
1
1
PARTS
QTY PARTS QTY
8. Table support
9. Table adjustment handle
1
1
1
10. Column assembly
Column collar
Gear rack
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the drill press and all its parts. Compare against the illustration drawing below.
WARNING:
To avoid fire or toxic reaction, NEVER use gasoline, naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the drill press.
WARNING:
‡
To avoid injury from unexpected start, DO NOT plug the power cord into a power source receptacle during unpacking and
assembly. This cord must remain unplugged whenever you are assembling or adjusting the drill press.
‡
If any part is missing or damaged, DO NOT plug the drill press in until the missing or damaged part is replaced and assembly
is complete.
‡
To protect the drill press from moisture, a protective coating has been applied to the machine surfaces. Remove this coating
with a soft cloth moistened with kerosene.
4
Hex wrench
Hex socket bolt 4
3. Accessory bag #2
1
5. Base
6. Table
1
4. Fence accessory
1
5
7
6
2
9
8
10
3
4