Steca Solarix 2020-x2, Инструкция по установке и эксплуатации

Страница: 4 / 23

EN Description
4 751.792 | Z01 | 1504
Danger of fire and explosion

Do not use the solar charge controller in any of the
following situations:
-
In dusty environments
-
In the vicinity of solvents
-
In environments where inflammable gases and
vapours can be present

Do not expose the batteries to open flames or sparks.

Ensure that the room is adequately ventilated.

Perform regular checks to ensure that the system is
functioning (charging) correctly.

Follow the charging instructions of the battery
manufacturer.
3 Description
The solar charge controller utilises the electrical power
generated by solar modules for charging two batteries and for
directly supplying electrical loads.
Product features:

Automatic voltage adjustment 12 V/24 V DC

Charging of main and auxiliary batteries

Monitoring of the charge state of the batteries

Dynamic charge control depending on the charge state of the
batteries (charging priority given to the main battery)

Automatic switch-on after shutdown

Suitable for systems with negative pole connected to
common ground

Solar charge controller provides overcharge protection and
deep discharge protection for the batteries

Automatic monthly maintenance charge

Hibernation mode

Separate load circuit for external loads (can only be used
when the main battery is sufficiently charged; indicated by
LED 4 lit up yellow or green at the load output)