MACH16
S
LIM
L
ITE
3Gbps
SATA
S
TANDARD
S
OLID
-S
TATE
D
RIVE
P
ART
N
UMBER
:
M16SD2S(3)-
XXX
U(T)(X)-XXX
D
OCUMENT
N
UMBER
:
61000-07132-311
R
EVISION
N
UMBER
:
3.11
R
EVISION
D
ATE
:
01/15/2013
111
FCC
D
ECLARATION OF
C
ONFORMITY
The Federal Communications Commission (FCC) Declaration of Conformity (DoC) will contain
the following:
Product type and model number
Marks and countries (e.g., CE, FCC, C-TICK, etc.)
The appropriate technical statement(s) required by the respective regulatory
agencies.
STEC name and address
STEC signature
List of all applicable standards to which the drive conforms.
FCC
C
LASS
B
W
ARNING
The Solid State Drive carries the FCC mark in accordance with related Federal
Communications Commission (FCC)
–USA directives. This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference.
This device must accept any interference, including that which may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Section 15 of the FCC Rules. Class B certification is for residential use.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment can generate, use and radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications; however, there is no guarantee that interference will not
occur in a particular installation. The operation of this equipment in a residential area may
cause harmful interference. It is the responsibility of the user to correct the interference at his
or her expense.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by switching the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet or circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced telecommunications technician for help.
Modifications made to this device without authorization from STEC, Inc. may result in the
device violating the FCC requirements for Class B digital devices. In that event, the right of the
user to use the equipment may be limited by FCC regulations, and the user may be required at
his or her expense to correct any interference to radio or television communications.
R
ESTRICTION OF
H
AZARDOUS
M
ATERIALS
(R
O
HS
D
IRECTIVE
)
The SSDs comply with the European Union (EU) Restriction of Hazardous Substances
(RoHS) Directive, EU 2002/95/EC. The SSDs meet the requirements for the following banned
substances: Lead, Mercury, Hexavalent Chromium, Cadmium, Polybrominated Biphenyls
(PBB) and Polybrominated Diphenyl Ether (PBDE). 2008-10-22.
