1½“ Hole
located four feet
from the floor
Double-Sided
Adhesive Pad
IMPORTANT:
Run the
Control Cable through
a ¾” conduit.
Coupler
To Steam Generator
Modular Jacks:
All four modular jacks are
identical and work in
any combination.
Connect to any jack.
¾" Conduit
To Control
C
US
®
SHOWER
STEAM
SHOWER
STEAM
1
1
2
2
9:31
IM
IMPORTANT: The TSC-450 Control will only function with the current TSG steam generators.
Installation Instructions
Steambath Control
Installation Instructions
Model: TSC-450
Control Features
1.
Timer control
2.
Temperature control
3.
Multiple user settings
4.
AudioSense™ control
5.
ChromaSense™ control
6.
AromaSense™ control
7.
ShowerSense™ control
8.
Other Miscellaneous settings
NOTE: For more details see separate operating instructions.
IMPORTANT: Control MUST be installed inside the steam room
for proper operation of the system.
1.
Pre-Installation - Control Location
The TSC-450 Control must be installed inside the steam
room. For convenience the recommended height from the
floor is four feet. If a TSSH is also installed we recom-
mend a height of 4½" feet when used for both steam and
shower. Provide a 1½" hole in the wall at this location (see
Figure 1).
IMPORTANT: Multi-conductor cable must be installed so
that the end will not be buried inside the wall. The unit will
Total Sense Touch Control
Figure 1
Figure 2 - Cable Installation on Generator
12/15
Pub. No. 290-D
- 1 -
Required Inside
Installation
TSC-450 Control.
Locate away from the
direct line of shower
spray and do NOT
locate above
steamhead.
Cleaning Instructions: Use a damp cloth and mild soap.
Do NOT use abrasive cleaners which might scratch the
surface or the base of the control.
not operate unless the control is installed.
2.
Electrical Rough-in
Remove the multi-conductor cable from the control
packing box. Carefully route the multi-conductor control
cable from the steam generator to the TSC-450 located
inside the steamroom (see Figure 1). Route multi-
conductor cable through a ¾" conduit to protect the cable
from damage and to facilitate replacement if necessary.
Important: Locate Publication No. 199 “Steam Bath Important Safety Instructions”. This publication includes a Warning
label that the contractor must install on the wall near the entrance to the steam room in a highly visible location. This
label and its additional safety information are packaged with the generator in the envelope containing the installation
instructions. If it is lost or missing contact Steamist (201-933-0700) for a replacement Publication No. 199. This publica-
tion along with all documents must be left with the owner.
!
®
