SteamandGo SAGS3, Инструкция по эксплуатации

Страница: 4 / 15

4
Brief introduction
As a high-grade ironing appliance, the product is applicable to such places as home, hotel.
It has compact and light weight design, save storage space. It provides massive high
temperature steam, can easily remove wrinkles in short time. It heats up just in short time.
Large water tank can steam 40 minutes continuously.
Inspection should be made before operation
Get rid of blockage if it exists in the steam pipe and inlet & outlet water pipe. If the power
line has been damaged, instead of taking apart on your own, make the repair or
replacement at a specified maintenance point or by a professional.
I Feature
·1300W high-power, 35S rapid steam generation and heating
·1400ml large capacity water tank, to meet the ironing demand for a long time
·98
℃
high temperature steam, remove wrinkle, does not hurt the clothes
·Intelligent temperature controller, quality fuse, automatic overheat protection without
water, safe and reliable
·3 section telescopic pole design, free to adjust the height
·360-degree rotating racks can be folded, easy for storage
·At the bottom of the drain valve, drain directly, easy to operate
II Thermostat
Thermostat fixed on the heater controls it operating in a safe range of temperature and
prevents danger caused by high temperature effectively.
III Thermal fuse
The thermal fuse will be burned out when temperature of heater rises too high which
prevent danger automatically.
Warning:
Steam pipe nozzle should not be too low, otherwise it will lead to noise and small steam; if
the power line is damaged, in order to avoid danger, it must be maintained or replaced in
designated maintenance points specified by our company instead of replacing it by users.
No electricity during water injection and cleaning period.