SteamandGo SAGS3, Инструкция по эксплуатации

Страница: 10 / 15

10
Instructions of operation
1
：
Please make sure the power switch is off before start working.
2
：
Take out the water tank
，
turn off the tank nut on the bottom, fill the water into the
tank(see picture 1), then tighten the nut(see picture 2). Pay attention to that only can fill
cold water, not hot water. In order to extend the life of the machine, we suggest that you
may use the water that does not contain minerals or distilled water. Put back the water
tank, and make sure that the position is installed correctly. (see picture 3)
3: Connect the plug with the power socket.
4:Turn on the switch, the steamer starts to work when the power indicator is turned on
，
steam will come out from the spray head in short time.
5: Turn off the switch after finishing steaming, the power indicator will be turned off, the
machine stops working. Disconnect the plug from the power socket.
Usage of two clamps
Two clamps can fix shirts, or trousers etc.
Installation of the hanger with hook.
Firstly, unfold the hanger and buckle up the two small poles to the middle to form the
hanger shape. Place the two small clamps on the small poles. Then attach the hanger to
the top of the supporting pole. Then place the spray head on the hook.