Pressing With Steam
1. Vertical ironing
Place garment on clothes hanger, and place the hanger on Hanger Hook, fold
the ironing board, and start ironing garment.
CAUTION: Before ironing, please set temperature to MAX, references the
figure 15.
Note: Please iron cloth once the power light turn to Blue color, which
means steam is ready. If you iron in the Red light, the iron may spray
water since the steam is not ready,
Temperature setting:
Dial the knob as the clothes material required to align with
the black dot. Clockwise direction is rising the temperature, counterclockwise
direction is lower the temperature.
Try iron:
After sets temperature, it
’s better to try on clothes, to check if the
temperature is too high or not. If the temperature is too high that will burn the
clothes.
CAUTION: Do not press steam button when setting the temperature,
otherwise the Hot Steam may escape from the nozzle to burn.
Vertical ironing board could be used as a support for ironing. Fold the ironing
board, and lock it. Hang your cloth on the cloth hanger, and then press the steam
button, the pressurized Steam will come out from the soleplate of Steam iron head,
slide the iron head from the bottom to the top of the garment until remove all the
wrinkles and refresh the clothes as figure 16 shows.
2. Horizontal ironing
Lay down the ironing board, and adjust to a proper height. Put your cloth on the
ironing board, and then press the steam button, the pressurized Steam will
come out from the soleplate of Steam iron head, Slow slide the iron head, from
the bottom to the top of the garment until remove all the wrinkles and refresh
the clothes. As figure 17 shows
.
WARNING! Never unscrew the fill cap during use, only can unscrew it until all
pressure has been released.
Refill water
When the water used up, no steam will spray out even pressing the Steam Button.
Now the water needs to be refilled if you still want to use the garment steamer.
To refill the water, please do as following:
a) Unplug from the electrical outlet.
b)
Unscrew the Safety Cap slowly. Before unscrewing it completely, wait for the
hissing noise created by residual steam to stop.
c)
Keep the unit cool after 30min at least
d)
Unscrew the Safety Cap completely and use the measuring cup and funnel to
fill water into the boiler, Be carefully not to let the water leak out.
e)
Screw the Safety Cap back on.
f)
Plug in the electrical outlet and continue to use it.
Note:
This unit with high pressure and high temperature, if filling the water
when the unit still hot, the water may sprays out.
Figure 15
Figure 17
Figure 16
