Stealth Cam STC-PX18CMO, Инструкция по эксплуатации

Страница: 8 / 36

www.stealthcam.com Page
877-­‐269-­‐8490
8
CAMERA PROGRAMMING – CUSTOM (CONT)
CUSTOM – This is the fifth setting and is defined by the “user”. When the camera is changed to
this mode, the display screen will give a digital read out of the following:
dLY 30 – (Delay) Counts down from 30sec to 0sec
The system default programming is set to take photos at 4MP resolution, 5-­‐second timeout delay
and 1 Photo Burst. The 30-­‐second timer will count down towards 0 showing how much time is
left to
enter the Custom configuration menu.
To make changes to the programming, press the
UP or DOWN arrow to enter the configuration
menu before the countdown reaches zero. By pressing the DOWN arrow button you will move to
the next setting option, which is DATE. By pressing the UP or DOWN arrow you will be allowed to
scroll through all the different menu choices. Once you find the option you want to change press
the
ENTER button. Pressing the ENTER button on a listed configuration option will cause the
option to blink and allow it to be changed. By pressing ENTER again once an option has been
changed will set the new configuration, save it to the camera’s memory, and return to options
section of the
MENU configuration. Once all the settings have been changed to the operator’s
desired settings scroll through the menu till you see the word QUIT and then press ENTER .
The following are all the options and descriptions of how to change each configuration: