Stealth Cam FLX CAMERA, Инструкция по эксплуатации

Страница: 13 / 62

www.stealthcam.com Page
877 -­‐ 269 -­‐ 8490
13
CAMERA SETUP (cont.)
!
Red
uce Blur (Default – A
dvanced)
o
PROGRESSIVE – This setting will use a maximum exposure time of 1/125sec for the night
photos. Other adjustments are made to increase the brightness and clarity of the
photo.
o
ADVANCED – This setting will use a maximum exposure time of 1/
4
0sec for the night photos.
o
STANDARD – This setting will use a maximum exposure time of 1/15sec for the night photos.
!
Photo Burst (Default – 1 Photo)
o
Capturing options will be 1 to 9 images with a 1.0 sec delay.
o
The options are 1 Photo, 2 Photos, 3 Photos, 4 Photos, 5 Photos, 6 Photos, 7 Photos, 8
Photos, and 9 Photos.
!
Burst Interval (Default – 1 second)
o
This setting allows the camera to set the time between each capture within a single triggered
event.
o
The options are 1 second, 2 seconds, 3 seconds, 4 seconds, and 5 seconds. (Note while in
30MP the interval can be 2-5 seconds)
!
IR Brightness Control (Default - Full)
o
Full - This enables the maximum power of the LEDs to have the brightest illumination
during night captures
o
Half - Reduces the power of the LEDs to reduce the frequency and effects of overexposing the
object.
!
Smart Illumination Technology (Default - OFF)
o
While enabled the camera will actively monitor the light level and and activate LED
illumination for a color image in the twilight hours.