2 For your safety
SMFS-U-CM-110
9 / 40
www.stauff.com
Electric shock from live components
• All electrical installation and maintenance work is to be carried out
only by qualified electricians
• Disconnect unit from power supply prior to performing work
• Check components for electric charge prior to performing work
Burns from hot surfaces
• Let hot components cool down before starting any work
• Wear protective gloves
2.4 Tasks and duties of the operating company
To ensure safe operation of the machine the operating company has at least
the duty …
• to ensure that the machine is only operated according to its intended
use, in a proper condition, with completely assembled safety equipment
and without damage.
• to define the area of use and draw up corresponding operating
instructions (standard operating procedures).
• procure the respective latest version of the regulations concerning
operation and to familiarise the operating personnel with these
regulations.
• to provide the operating instructions always legibly and complete near to
the operating site.
• to ensure adequate stability.
• to avoid tripping hazards.
• to ensure adequate ventilation and illumination of the work areas.
• Instruct personnel in safe working practices and regularly check that
personnel work with an awareness for safety and hazards.
• to ensure that unauthorized persons have no access to the danger zone.
• to provide the necessary personal protective equipment.
• have electrical installations tested at least once a year by electrical
specialists.
