STATUS SCIENTIFIC CONTROLS
FGD3 Infrared Gas Detector Heads
TD06/024
Issue:
7
Change Note:
1904
Page 19
5.2.6
C: 6 - Display mode
This option is used to set the display to match the type of sensor fitted.
•
Select menu mode
C: 6
(refer to section 5.2) and press ENTER.
•
Use the UP and DOWN button to move the decimal point to the desired
setting.
•
Press ENTER. Pressing MENU instead of ENTER aborts the feature.
•
Press MENU to return the instrument to its standard mode of operation.
Note:
changing the decimal point will not result in a more accurate reading.
5.2.7
C: 7 - Display Firmware Version
This option is used to view the processor firmware version.
•
Select menu mode
C: 7
(refer to section 5.2) and press ENTER.
•
The display shows 9.3Ai.
•
Press MENU to return the instrument to its standard mode of operation.