C O M M E R C I A L
For more information on the Sandblaster® contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCESS00308
With Automatic Self-Cleaning
™
Design
State’s Sandblaster
®
is the original Self-Cleaning commercial electric water heater, with a proven
design that automatically reduces sediment build-up, the number one threat to any water heater’s life
expectancy and energy efficiency.
Sandblaster electric water heaters are equipped with a cold water inlet tube that
directs incoming cold water to create Self-Cleaning turbulence in the tank.
Self-Cleaning action keeps sediment in suspension, so it does not get a chance to
settle down, and is harmlessly carried out when hot water is drawn. With reduced
sediment build-up, Sandblaster retains its rated efficiency longer, lasts longer,
and helps keep water heating costs down!
Other Sandblaster commercial electric water heater features include:
• Glass-Lined Tank
– Three sizes: 50, 80 and 119-gallon capacity.Tank interior is coated with glass
specially developed for water heater use. Tanks rated at 150 psi (1034 kPa) working pressure.
Foam insulation reduces costly heat loss and is vermin proof.
• Elements
– Incoloy sheathing for longer life. Low watt density means lower surface temperature
to minimize scale build-up and more surface to heat water. Element sizes from 3 to 6 kW. Use 3,
6 or 9 elements standard; total of 9 to 54 kW input (see chart on page 3).
• Fusing
– Protects all elements, thermostats, and internal wiring circuits against excess current
flow. Meets National Electric Code requirements that non-ASME tanks must have internal fusing
when current draw exceeds 48 amps.
• Standard Voltages
– 208, 240 and 480V single-phase and three-phase delta. Convertible from
three-phase to single-phase (in field) and vice versa. 277V single-phase also available.
• Terminal Block
– Factory installed. Just bring the service to the heater and connect to block.
• Controls
– Available with either immersion (IFE models) or surface thermostat (SFE models).
Immersion temperature control adjustable through a range of 60°F to 180°F. Manual reset high
temperature cutoff. Surface mount models have one temperature control (adjustable through a
range of 120°F to 180°F) and manual reset high temperature cutoff per element. Thermostat step
control may be achieved by varying settings on individual temperature controls.All controls located
behind hinged control compartment door for quick, easy access.
The Superior Sandblaster Warranty
Every Sandblaster is covered by a 3-year standard warranty against tank leaks. An optional 5-year extended tank warranty is also available on 50, 80 and
119-gallon models. Unlike other manufacturers, State has so much confidence in Sandblaster’s superior construction and Self-Cleaning design, there is no “fine print”
excluding failure caused by sediment build-up in either the standard 3-year or optional 5-year extended warranty.
SANDBLASTER
Commercial Electric Water Heaters
197523_SCESS00308.indd 1
197523_SCESS00308.indd 1
8/12/08 4:56:34 PM
8/12/08 4:56:34 PM
