Starwin V9 OTM45 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 48

Starwin V9 OTM45 Скачать руководство пользователя страница 15

15

Copyright © 2021 China Starwin

5.2

Mounting Antenna on a Flat Platform

WARNING: Ensure the roof rack or the platform for V9 OTM45 Antenna installation is
strong enough to support the equipment weight during the vehicle move at
maximum speed.

The platform is prepared and installed by customer on the vehicle roof by welding, screwing or
by any other reliable fixation method. Holes for antenna assembly installation on the platform
should be drilled according to the installation holes diagram (Figure 5-3) before the platform is
fixed at the vehicle roof. The antenna assembly mounts directly to the platform and is secured to
it with four M8 screws.

NOTE: Do not bend the bottom plate of the antenna radome during the installation
     process. If necessary, install additional spacers between the roof rack and the
    antenna bonding legs. To provide the following proper system operation, the
     antenna must be kept horizontal during the installation.

Figure 5-3: Overall Dimensions and Installation Holes Positioning

NOTE: It is strictly recommended to use thread locking adhesive (like Loctite
Threadlocker Blue 242 or its analog) to secure bolts and nuts from accidental

loosening from shock and vibration after antenna installation.

Double-check carefully to ensure that the antenna is installed firmly.

«
...
13
14
15
16
17
...
»

Содержание V9 OTM45

















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды