10~30cm
Download the mCamView2 user manual here
h t t p : / / w w w . s t a r v e d i a . c o m / d o w n l o a d . h t m l
Requires iOS 6.0 or later
iOS iPhone
、
iPad
Requires Android 4.0 or Later
Android Smart phone
、
Tablet
STEP 1
STEP 2
mCamView2
Download the mCamView2 APP
STEP 4
Log in to the Camera
STEP 5
SD Card Recording
Scan the QR code to download the software “mCamView2”
from App Store for iPhone/iPad
or from Android Market for Android devices.
Power on the Camera
STEP 3-1
WiFi Setup
Connect the Power Adapter to the Camera
Do not connect the Ethernet cable.
Follow the steps and enter the
WiFi password to generate a QR code.
Generate QR Code
Mobile Connected to 2.4G Hz WiFi
Make sure your iPhone/Android
mobile is connected to a 2.4G Hz WiFi
router, this is the must.
Smart WiFi Setup
Open the App mCamView2, tap the “+”
icon to add the camera, choose “Smart
WiFi setup” to setup the camera with
WiFi connection.
My-Home
My Wi-Fi Network
Tap the Camera icon to log in to the camera.
The default administration account is “admin”,
the default administration password is empty (leave blank).
After logged in, tap the camera icon to play the live video.
Notice : there are two passwords for the camera, one is
the administration password, the other one is the video
play password. The default video-play password is “ipcam”
(lowercase).
My home
My home
a
Insert the SD card into the camera, the yellow LED on the
camera will be blinking.
b
The SD card will start to do the recording once the alarm
notification is triggered. The camera will do 5 second
pre-recording to prevent the loss of the important starting
moment.
c
To enable the continuous SD card recording, please enable it
inside the camera settings.
d
To playback the recorded video, tap the
on the App and
choose the “SD Card” and date/time to do the playback.
My home
* Class 10 micro SD is prerequisite
SSID: My Wi-Fi Network
Password
Supported Smart phone system version
Setup the camera from a Smartphone/Tablet
Press the WPS Button
Press the WPS Button on the Camera.
The LEDs will start flashing.
Scan the QR Code
Place your mobile about 10-30cm away
from the camera.
The camera will beep when the QR code
is successfully scanned. It will flash the
LEDs and start the WiFi connection.
WiFi Connection is Established
When the WiFi connection is established,
the blue LED will be flashing and the red
LED will remain on.
The new icon for this camera will be
created on the App.
My home
button
Quick Installation Guide
Full HD IP Network Camera