12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Input Selection Buttons
Press and release the
Input Selection Button
, located on the
front of the
Transmitter
, to select the desired
HDMI Source
Device
. The
LED Indicator
for the selected
HDMI Input Port
will light up and the selected
HDMI Source Signal
will display
on the
HDMI Display Device
.
Manual Operation with Serial Control Port
1.
Configure the settings using the
Serial Control Port
with
the values shown below.
Baud Rate: 38400 bps
Data Bits: 8
Parity: None
Stop Bits: 1
Flow control: None
2.
Open a third-party
Terminal Software
to communicate
through the
Serial Control Port
and use the on-screen
commands, displayed on the next page, to operate and
configure the
Transmitter
and
Receiver
.