Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (ST8CU824)
Components
Function
1
Charging LEDs (8)
•
Solid Red:
Indicates that the corresponding
USB-A Port
is charging the connected
Device
.
2
Power Button
• Used to turn the
Charging Hub
On or Off.
3
DC IN 12V
• Used to power the
Charging Hub
.
4
USB-A Ports (8)
• Used to charge multiple
Devices
(max = 8).
• Voltage at the common collector (VCC) = 5V
• Ground (GND) = 5V
• D+ = 2.7V
• D- = 2.0V
8-Port Charging Station for USB Devices | 8x 2.4A
2
Requirements
For the latest requirements, please visit
www.startech.com/ST8CU824
• Phillips Head Screwdriver (Optional)
Installation
Notes:
The
Charging Hub
features a chipset that can detect the required charging
mode of a device, and switch to the proper mode for full-speed charging (e.g. If an
Apple device is connected, it will automatically charge to Apple charging mode
specifications).
When charging multiple devices, the
Charging Hub
may become warm to the touch,
this is normal and will not harm the connected
Device(s)
.
1.
Connect the
Power Adapter
to an
AC Electrical Outlet
and the other end to the
DC
IN 12V Port
on the
Charging Hub
.
2.
Press the
Power Button
to turn the
Charging Hub
On.
3.
Connect your
Device(s)
to the corresponding
USB-A Ports
on the
Charging Hub
.
Installing the Mounting Brackets (Optional)
Note:
Before installing the
Mounting Bracket
to the mounting surface, contact a
professional. Product mounting should be completed by a certified professional as per
the local safety and building code guidelines.
1.
Align the
Mounting Holes
on the
Mounting Bracket
with the four
Mounting Holes
on the back of the
Charging Hub
.
2.
Insert the
Bracket Screws
(x4) through the
Mounting Bracket
and into the
Mounting Holes
on the back of the
Charging Hub
.
3.
Tighten the
Mounting Screws
using a
Phillips Head Screwdriver
, be careful not to
over-tighten.
Installing the Rubber Feet (Optional)
1.
Remove the
Rubber Feet
from the
Adhesive Strip
.
2.
Align each of the
Rubber Feet
on the back of the
Charging Hub,
close to each of
the four corners.
3.
Remove the adhesive backing and apply the
Rubber Feet
to the
Charging Hub
.
Note:
Be careful not to cover the
Mounting Holes
when applying the
Rubber
Feet
.
3
1
4
