Instruction Manual
4
4. Connect the included SATA data cable from an available SATA/SAS host ports
on your motherboard to the SATA/SAS data connector port on the back of the
Backplane.
5. Connect a SATA Power connector from your power supply to the SATA power
connector port on the back of the backplane.
Hard Drive Installation
1. To remove the tray, squeeze the latch to release the door handle, pull the tray door
handle open and slide the tray out of the enclosure.
Note:
If the drive is locked, insert either of the included bay keys into the 2.5in drive
bay key hole, and turn the key clockwise into the unlock position before attempting
to remove the tray.
2. Insert your desired drive into the drive tray with the bottom mounting drive holes
in line with the mounting holes on the drive tray. Fix the drive to the drive tray using
four of the included drive screws (silver).
