20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Flipping the Mounting Rails
3.
To reattach the
Mounting Rails
to the
Wall-Mount
Enclosure
, use a
Phillips Head Screwdriver
to install and
tighten the screws that you removed in step 1.
Mount the Enclosure to the Wall
Warnings!
Remove all equipment from the enclosure before
you attempt to mount the enclosure to the wall.
Wall structures vary and it is important to make sure that the
type of wall structure and mounting hardware that you are
using will properly support the mounted equipment. Failure
to do so might result in personal injury and/or equipment
damage. The wall structure should be capable of supporting
at least four times the weight of the mounted equipment.
The
Wall-Mount Enclosure
weighs 32 lb. (14 kg) and can
hold up to 198 lb. (90 kg) in weight.