Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (HD2VID2)
Port/LED
Function
1
Composite LED
• Indicates that video is connected using the
HDMI Port.
2
Composite Video Port
(Yellow)
• Used to connect a
Display Device
to the
Converter
.
3
Stereo Port L/R (Red/
White)
• Used to connect an
Audio Device
to the
Converter
.
4
PAL/NTSC Switch
• Used to toggle between PAL and NTSC video
modes.
Port/LED
Function
5
DC/5V Port
• Used with the
Universal Power Adapter
to
power the
Converter
.
6
Power LED
• Indicates that the
Converter
is receiving
power.
7
HDMI Input Port
• Used to connect a
Video Source Device
to the
Converter
.
HDMI® to Composite Video Converter with Audio
1
Requirements
For the latest requirements, please visit
www.startech.com/HD2VID2
.
Note:
All Required items are sold separately.
• HDMI Enabled Video Source x 1
• Composite Video Enabled Display Device (e.g. Monitor, Projector, HDTV, etc.) x 1
• HDMI Cable x 1
• RCA Composite Video Cable x 1
• Phillips Head Screwdriver x 1
• Composite Audio Cable x 1
Installation
Note:
Power off all devices before connecting the
Converter
.
1. Connect an
HDMI Cable
to the
HDMI Port
on the
Converter
and connect the other
end of the
HDMI Cable
to the HDMI port on the
Video Source Device
.
2. Connect an
RCA Composite Cable
(sold separately) to the
Composite Video Port
on the
Converter
and connect the other end of the
RCA Composite Cable
to the
composite video port on the
Display Device
.
3. If HDMI audio is being used, connect
Composite Audio Cables
(sold separately)
to the
Stereo Port L and R Ports
on the
Converter
and the other end of the
Composite Audio Cables
to the
Speakers/Audio Receiver
.
4. Connect the
Universal Power Adapter
to the
DC/5V Port
on the
Converter
and
other end to an
AC Electrical Outlet
. The
Power
LED
will light up solid.
5. Power on the
Video Display Device
and the
HDMI Video Source
.
6. Slide the
PAL/NTSC Switch
to adjust the video mode to either PAL or NTSC.
Connecting a Regional Power Clip
1. Select a
Regional Power Clip
.
2. Align the two
Side Tabs
on the
Regional Power Clip
with the notches on the face
of the
Universal Power Adapter
.
3. Slide the
Regional Power Clip
down until you hear a click, connecting the contact
prongs on the
Regional Power Clip
with the contact prongs on the
Universal
Power Adapter
.
2
4
3
5
6
7
