21
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6.
Insert either the
M8x30 mm, M8x50
or
M6x30 mm Screws
(depending on the hardware requirement), through the
Rectangular Washers, Vertical Brackets, and into the TV.
Spacer Installation
7.
Use a
Phillips Head Screwdriver
to tighten the screws. Do
not over-tighten the screws.
Note:
Do not over-tighten the screws. If you encounter
resistance while you’re tightening the screws, stop tightening.
Failure to do so could result in damage to the TV.
