Instruction Manual
1
Introduction
Packaging Contents
• 1 x USB 3.0 to 2.5” SATA III Enclosure w/ Encryption
• 1 x USB 3.0 Cable
• 1 x Drive case
• 1 x Drive installation screws
• 1 x Mini screw driver
• 1 x Instruction manual
Note:
It is recommended that the contents of this enclosure be regularly backed-up,
as lost passwords or hardware failure (SATA drive or enclosure) will result in the stored
data being unrecoverable.
System Requirements
• Computer system with available USB port
• 2.5in SATA Hard drive (HDD) or Solid State Drive (SSD)
Warning:
To use AES encryption, the SATA drive must be initialized and formatted after
setup. This will erase all data on the drive.