Instruction Manual
17
•
Daylight Saving Time:
Enables the clock to automatically adjust in
accordance to Daylight Saving Time. Select
Disable
to prevent the clock
from changing. Select
Recurring
to configure the auto adjustment to repeat
every year. Select
Non-Recurring
to configure the adjustment to occur
once. (Default: Disabled).
•
Daylight Saving Time Offset:
Enables you to enter the number of minutes
to add during Daylight Saving Time change (Range: 1 to 1440).
•
Recurring From:
Enables you to define the week, day, hour and minute that
Daylight Savings Time will start every year.
•
Recurring To:
Enables you to define the week, day, hour and minute that
Daylight Savings Time will stop occurring every year.
•
Non-recurring From:
Enables you to define the week, day, hour and minute
that Daylight Savings Time will start in a single-year cycle.
•
Non-recurring to:
Enables you to define the week, day, hour and minute
that Daylight Savings Time will stop in a single-year cycle.
2.
Click the
Apply
button, to apply the changes.
Viewing System Time Information
1.
On the
Main Menu
, click on the
System
and select
System Time
from the
drop-down list.
2.
The
System Time Information
page will appear allowing you to view the
following user information:
•
Current Date/Time:
Displays the date and time that the system is currently
set to.
•
SNTP:
Displays whether SNTP is enabled or disabled.
•
Time zone:
Displays the time zone that the system is currently set to.
•
Daylight Saving Time:
Displays whether Daylight Savings Time is enabled
or disabled.
•
Daylight Saving Time Offset:
Displays the number of minutes that are
added in the current Daylight Savings Time change.
•
From:
Displays the date and time that Daylight Savings Time will start.
•
To:
Displays the date and time that Daylight Savings Time will stop.
