Instruction Manual
126
Editing/Deleting an IPv4 ACE Table
•
On the
IPv4 Based ACE Table
page, click the
Edit
button next to the ACL entry
you wish to edit.
- or -
Click on the
Delete
button to delete the corresponding ACL entry.
Naming an IPv6 Based ACL List
1.
On the
ACL Table
page, enter an IPv6 based ACL list name in the
ACL Name
field.
2.
Click the
Add
button to create the new IPv6 based ACL list entry you wish to
edit.
Deleting an IPv6 Based ACL List
•
On the
ACL Table
page, click on the
Delete
button to delete the
corresponding ACL entry.
Adding an IPv6 - Based ACE List
1.
On the
IPv6-Based ACE
page, enter the required information into the
following fields:
•
ACL Name:
Select and ACL Name from the drop-down list. The parameters
selected will apply to the ACL list selected.
•
Sequence:
Indicate the sequence that the ACL list will be processed (range
1 - 2147483647).
•
Action:
Select the ACE forwarding action:
•
Permit:
Any frames that match the ACE parameters are forwarded.
•
Deny:
Any frames that match the ACE parameters are dropped.
•
Shutdown:
Port shutdown is disabled.
•
Protocol:
Select a protocol filter for the corresponding ACE.
•
Any(IP):
If selected no IP protocol is specified.
•
Select from list:
Allows you to specify a specific IP protocol e.g. ICMP.
•
Source IP Address:
Allows you to select a source IP address filter:
•
Any:
If selected no source IP address is specified.
