Instruction Manual
119
Adding an MAC-Based ACL List
1.
On the
MAC-Based ACL
page, enter an
ACL Name
.
2.
Click on the
Add
button to add the new
ACL List
.
Deleting an ACL List
•
On the
ACL Table
page, click on the
Delete
button next to the
ACL List
you
wish to delete.
Adding MAC Based ACE
1.
On the
MAC-Based ACE
page, select the MAC Based ACE settings you want to
apply:
•
ACL Name:
From the drop-down list, select an ACL List that you wish to
apply the ACE parameters to.
•
Sequence:
Allows you to change the sequence numbers assigned to rules
within the MAC ACL list. 1 is the first rule that will be processed in the
sequence.
•
Action:
Select the ACE forwarding action
•
Permit:
Any frames that match the ACE parameters are forwarded.
•
Deny:
Any frames that match the ACE parameters are dropped.
•
Shutdown:
Port shutdown is disabled.
•
DA MAC:
Select a DA MAC filter to apply to the ACE.
•
Any:
Filters all MAC Addresses.
•
User Defined:
Allows you to apply a filter to the MAC Address entered in
the DA MAC Value field.
•
DA MAC Value:
This field appears when a DA MAC value of
User Defined
is
selected, Enter the MAC Address you wish to filter.
•
DA MAC Mask:
The DA MAC Mask is a 12 digit code made up of 0s and 1s.
•
0:
The corresponding MAC address will be included.
•
1:
The corresponding MAC address will be ignored.
