14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2.
Insert four
M6 Screws
through four
M6 Flat Washers
and
down through the holes in the
Rack
3.
Thread four
M6 Flange Nuts
onto the
M6 Screws
.
(Figure 8)
4.
Hold the
M6 Screws
with the
Pliers
and tighten the
M6
Flange Nuts
with the
10 mm Wrench
.
Note:
The
M6 Screws
will freely rotate if they are not held to
prevent rotation.
5.
Repeat steps 1 to 4 to install the three remaining
Casters
.
Install the Cable Management Hooks
1.
Align the
Cable Management Hooks
with the
Cable
Mounting Screw Holes
along the back of the
Rack
.
2.
Insert a
Hook Mounting Screw
though the
Rack
and into
the
Cable Management Hook
. (Figure 9)
Figure 8
