Start italiana MAGLINK 16T, Руководство по установке

Страница: 42 / 48

Maglink 16T rev.08 2015-07 - ENG
42
ANTI-THEFT DETECTION CONTROL
If the SD card is not present this function is disabled.
Antitheft can be managed through DIPSW3 to allow the activation through the front panel or through the input.
If managed through front panel:
From the home page if LEFT/RIGHT/ENTER keys are pressed in sequence the Anti-theft detection is enabled.
To disable press again from the home page LEFT/RIGHT/ESC keys in sequence.
If managed through the input:

giving 12V on Input 2 antitheft is enabled;

giving 0V on Input 2 antitheft is disabled.
This functionality allows to connect the Console to a general existing antitheft system in order to manage activation/deactivation
together with the equipment itself.
After 10-15 minutes the system is active and if alarm occurs Relay nr. 1 will be activated for 1 second.
UART LOGGER
This page displays the activity of the serial port for diagnostic purposes.
SAFETY INSTRUCTIONS
“Safety Instruction” attached.