STARPLUS STSe Key System, Руководство по установке

Страница: 86 / 94

4-18 SMDR
Chapter 4 - Maintenance and Troubleshooting
STARPLUS STSe - Installation Manual August 2005
Exit the Monitor Mode
The Exit command terminates the current Monitor enable/disable session. If Event(s) Trace was
or is still enabled, event records display only after exiting the MONitor mode.
»
The Exit command format is: mon> x
Figure 4-8: Event Trace
SMDR
The SMDR feature provides detailed records of all outgoing and/or incoming, long distance
only or all calls. The SMDR Qualification Timer determines the time needed to determine a valid
SMDR call for reporting purposes. By default, this timer is set to 30 seconds and is variable from
00-60 seconds in one-second increments. This feature is enabled or disabled in system
programming. By default, SMDR is disabled and set to record long distance calls only.
A printout format of 80 characters maximum or 30 characters maximum may be selected in
system programming. The standard format is 80 characters per line. A 30-character format
generates three lines per message.
mon>x
DATE: MM/DD/YY TIME: 10:46:33
exiting monitor...
Sta 100: State= IDLE, Evt= Dial Pad (26), Data=1
Sta 100: State= DIALING, Evt= Dial Pad Release (31), Data=1
Sta 100: State= DIALING, Evt= Dial Pad (26), Data=10
Sta 100: State= DIALING, Evt= Dial Pad Release (31), Data=10
Sta 100: State= DIALING, Evt= Dial Pad (26), Data=2
Sta 100: State= DIALING, Evt= DSS (60), Data=2
Sta 100: State= WAIT_DSS_SZ_RSP, Evt= Seize Nak (15), Data=1
Sta 100: State= MISC_TONE, Evt= Dial Pad Release (31), Data=2
Sta 100: State= MISC_TONE, Evt= Key Data (27), Data=52
Sta 100: State= MISC_TONE, Evt= Mon Key (145), Data=-1
Sta 100: State= MISC_TONE, Evt= On Hook (17), Data=0
Sta 100: State= IDLE, Evt= Seize (14), Data=10
Sta 100: State= RINGING, Evt= Aux (34), Data=0
Sta 100: State= RINGING, Evt= Ring Update T/O (151), Data=0
Sta 100: State= RINGING, Evt= Key Data (27), Data=52
Sta 100: State= RINGING, Evt= Mon Key (145), Data=-1
Sta 100: State= TALK, Evt= Ring Update T/O (151), Data=0
Sta 100: State= TALK, Evt= Key Data (27), Data=52
Sta 100: State= TALK, Evt= Mon Key (145), Data=-1
Sta 100: State= TALK, Evt= On Hook (17), Data=0