i95 LUX, i95, i95 ECO
Entering programing mode using unlock code for
i95 and i95 ECO
Switch the immobilizer to the emergency unlock mode (see page
41). Leave the ignition on. Then, perform the following actions:
1) After 20 seconds, you will hear a long (10
sec) signal. While the signal is on, turn off
the ignition.
2) Turn on the ignition. You will hear 5 quick
audible confirmation signals. The system
will switch to the programing mode.
3) Insert the battery into the label. After a
few seconds the label LED will start
blinking in green (1 blink = 3 sec),
expecting parameter input.
44
During the long
audible signal
Off
5 times
