Stark KH 1600 S, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 23

Sivu 16 / 23
7.5. Replacing the side brushes
Remove the nuts at the bottom of the side brush (picture 9) and detach the brush. Attach a new brush.
Picture 9. Nuts of the side brush
7.6. Transferring the collecting sweeper
Lift the collecting sweeper high enough and reduce driving speed if needed, especially on bumpy roads. The collecting
sweeper or the base machine can be damaged due to excessive speed.
7.7. Detaching the collecting sweeper
1. Lower the collecting sweeper to an even ground. Lift the broom roller so that the brush rings are not pressed
against the ground.
2. Turn off the base machine, put on the parking brake and release pressure from the system.
3. Detach the hydraulic hoses and protect the couplings with plugs.
4. Open the mechanical lock and detach the sweeper.
5. If the sweeper is not used for a long period of time, it needs to be cleaned and lubricated properly before
storage. Make sure there is no water in the container or hoses. Store the equipment indoors, if possible.