background image

 

HAIR DRYER  HD-21

ASSEMBLY INSTRUCTIONS

0

1

Characteristics of the product

 

1 .With the power switch, the hair dryer without current 

when you don

t operate it. 

2.High-low heats and winds setting for choice. 

3 With spring button on the handle, it works when  you 

hand the handle and touch the spring button. It doesn’t 

work when you don’t touch it. 

The parts of the product 

Содержание HD-21

Страница 1: ...the power switch the hair dryer without current when you don t operate it 2 High low heats and winds setting for choice 3 With spring button on the handle it works when you hand the handle and touch the spring button It doesn t work when you don t touch it The parts of the product ...

Страница 2: ...ning ways to install 1 Please bore two holes with 6mm s diameter according the picture 2 2 Put the toggle inside the holes and tighten one screw to the toggle up tighten the other screw through the pothook and install it on the wall completely 3 Insert the pins in electrical outlet Turn on the switch that s ok Closing ways to install ...

Страница 3: ...t which was detached in point 2 pay attention on the wireTs direction about N and L Please place it on the same place after you connected 4 If everything is ok please load the front housing again and tighten the screw 5 Use the screws to root the hair dryer on the wall 6 Insert the Pins in electrical outlet turn on the switch that s ok How to use Turn the general switch of power on the hair dryer ...

Страница 4: ...ut the combined cord Don t let the man who don t know how to operate the hair dryer operate the hair dryer alone except monitored by man 3 Clean and keep hair dryer Please pull out the power plug from electrical outlet when you cleaning the hair dryer Please pay attention the hair to avoid absorbing in the inlet of hair dryer Please use the cleaning solution which the water with soap to clean the ...

Отзывы: