StarForm Swift-G OI-G1480, Руководство пользователя, Страница: 47 / 84

8 GenICam
TM
Interface
This chapter contains a complete reference of all available features
which are required to configure and control the StarForm
TM
Swift-
G camera. The features are grouped into a hierarchical tree of
categories with the
Root category as the root of the tree.
The feature categories are listed first, in alphabetical order, along
with a table showing their child features.
The non-category features follow, again listed in alphabetical order.
Each GenICam
TM
feature is itemised as shown in the example
below.
Name
name of feature [selector]
Category category of feature
Interface data type of feature
Access read/write access
Unit physical units
Visibility visibility level
Values possible values
8.1 Categories
8.1.1 AcquisitionControl
Category for the acquisition and trigger control features.
Name Descripton
AcquisitionMode Sets the acquisition mode of the device.
AcquisitionStart Starts the Acquisition function of the device.
AcquisitionStop Stops the Acquisition function of the device at the end of the current Frame.
IlluminationEnable Controls if the illumination is enabled.
IlluminationPower Sets the emission and exposure counts.
TriggerActivation Specifies the activation mode of the trigger.
TriggerMode Controls if the selected trigger is active.
TriggerSelector
Selects the type of trigger to configure.
TriggerSoftware Generates an internal trigger.
TriggerSource Specifies the internal signal or physical input Line to use as the trigger source.
TriggerWaitMode Specifies camera action when waiting for a trigger.
39 of 76