StarDot Express Video Server, Руководство пользователя, Страница: 30 / 44

Page 30 Express Video Servers
To modify the password of an existing user, click on the user name
and then type in a new password in the password field (retype it in
the verify password field). Then click the Add/Modify button.
Adding a New User
To add a user to the Users list, type in the desired username in the
Name field. Type and retype a password in the Password fields. Click the
Add/Modify button. New users will only have viewing rights; only the
admin user can make configuration changes in the Express server.
Deleting a User
To remove a user from the Users list, click on the desired username
and click on the Remove button. Note: The default users, admin and
viewer , cannot be removed.
3.10 Advanced Menus
The advanced menu allows you to configure some advanced features
inside the video server such as triggers and dynamic DNS support.
3.11 Miscellaneous
Reboot Camera
Click this to reboot the video server.
Upgrade Firmware
Allows you to select a new firmware and upgrade the video server.
You can also use the StarDot Tools software to upgrade the firmware. It is
recommended that you clear the configuration settings before upgrading
(see the manual config section).
3.12 Manual Config
Configuration Files
This advanced menu provides access to all of the internal
configuration files. We recommend that you do not edit these files unless
you are well versed in Linux and the Express server settings.
3.13 Pan/Tilt/Zoom Functions
To use a pan/tilt/zoom camera with the Express server, you must
select a compatible model from the PTZ configuration menu. You may
need an RS-232 to RS-485 converter to control certain PTZ cameras.
This PTZ menu seen here will appear on the main viewing page of
the Express server.