Stardom SOHORAID SR2, Руководство пользователя

Страница: 9 / 35

SR2 Series User Manual
7
Pri HDD : Fail
Sec HDD : OK
Pri HDD : OK
Sec HDD : Fail
Primary drive error during rebuild Secondary drive error during rebuild
If during the rebuilding process, a drive malfunctions and is unable to continue the rebuilding
process, restart the SR2 to check and see that the drive is in fact malfunctioning. If it is, please refer
to chapter 6 "Hard Drive Replacement Instructions" to replace the malfunctioning drive.
Below are sample diagrams of drive malfunctioning.
Note :
The next time you turn on the power of the unit, the system will automatically continue
to process the remains. Please do not switch position of the drive at any time.
System Temp.
50
℃
System FAN
xxxx RPM
System temperature message System fan RPM message
9. Additional Display Messages of System and Operation Procedures
The SR2 frontal LCM panel is able to display additional messages such as firmware version, system
temperature and fan status by pressing the Up or Down buttons to make your selection.
Continuously pressing the selection buttons allows you to scroll through the menu. If not pressed
within 3 seconds, the display will revert back to its normal operational state.