-
axle case- 0.6/l.
- The first time oil change should be done after 50 work hours.
- The gear case has a vent with a dip-stick to monitor the oil levels, which should be refilled when
necessary. On the triple case, the proper oil level line is the midway range of the case, where the oil
level indicator of the container is found.
- Regarding the triple case, when changing out the oil, remove the main oil container of the three
cases, and fill each case with one liter each, which makes up the set, allowing to release of any air
and bathing the whole transmission with oil.
- After harvesting has come to an end, it is recommended to clean all external surfaces of the unit
and to apply oil to contain any corrosion;
- When not in use, the unit should be kept in a covered place, thus avoiding exposure to rain and
solar radiation.
5.2 - Tire air pressure
- Tire, Dw13.6” x 38” ; 14Ply ( Cross wheel)
- 40 lbs/in²
-Tire, 12.4” x 24” ; 10Ply ( Tandem wheel)
-Tire, 14.9” x 26”; 12Ply ( Tandem wheel)
- 34 lbs/in²
The oil quantity of each case is as follows: Triple case - 3/ l; Conveyor belt case - 7/ l;
- 32 lbs/in²
13