Star2Star Cisco SPA525G2 Quick User Guide
Copyright
©
2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications.
Page 1 of 2
Cisco SPA525G2
(5 Line appearance phone)
Quick User Guide
Basic Phone Features
Customizing Your Phone
For detailed information please consult
the Star2Star Phone and Features
Guide, available for view/download via
the Star2Star Web Portal at:
https://portal.star2star.com/
PLACING A CALL
Using the Handset:
1. Pick up the handset and dial the
desired number.
2. Press the
Dial
soft key to complete
the call.
Using the hands-free Speakerphone:
1. With the handset on-hook, either
press
(speaker button), or
(a line button). Dial the desired number.
2. Press the
Dial
soft key to complete
the call.
Using the optional Headset:
1. With the headset connected, press
(headset button), or
(a line
button). Dial the desired number.
2. Press the
Dial
soft key to complete
the call.
During a call, you can alternate
between handset, headset, or hands-
free modes by pressing the
or
keys.
ANSWERING A CALL
Using the Handset:
1. Pick up the handset.
Using the Speakerphone:
1. Press
,
Answer
soft key or
(red flashing line button).
Using the optional Headset:
1. Press
to answer the call using
a headset.
ENDING A CALL
1. Press the
End Call
soft key or
replace the handset.
2. Press
(line button) if you are
using the Speakerphone, headset or
handset.
3. Alternatively you may also press
(headset button) if you are using
a headset.
MICROPHONE MUTE
1. To mute the phone microphone,
speaker, or headset microphone press
. The button will glow red.
2. The other party cannot hear you.
3. Press
(microphone mute
button) again to unmute and resume
audio.
CALL HOLD AND RESUME
1. During a call either press the
Hold
soft key or hold button
to place the
call on hold.
2. The line button flashes red
.
3. The caller on hold will hear Music or
Message on hold if enabled on your
system.
4. Press the
Resume
soft key or
flashing red line button to re establish
the call.
LOCAL CONFERENCE CALLS
To create a three-way local
conference call:
1. You can create a conference with
two other parties
using the phones
local conferencing feature.
2. During an active call, press (right
arrow) then
press the
Conf
soft key to
create a new call.
3. The active call is placed on hold and
the caller will hear Music or Message
on hold if enabled on your system.
4. Dial the phone number of the second
party
5. When the second party answers,
press the
Conf
soft key again to join all
parties in the Conference.
When you hang up, the other two
parties are disconnected. To keep the
other parties in a call, but disconnect
you from the call, press
Join
.
Use the Star2Star Conference room
feature for larger conferences.
CALL TRANSFER
Blind Transfer (Transfer without
announcement):
1. During a call, press
(right arrow)
then press the
BlindXfer
soft key.
2. The caller on hold will hear Music or
Message on hold if enabled on your
system.
3. Dial the
number you want to transfer
the call to then press the
Dial
soft key
to complete the transfer.
4. Alternatively during a call press the
Transfer
soft key, dial the number you
require then press the
Dial
soft key
followed by the
Transfer
soft key to
complete the transfer.
Transfer (Announced):
1. During a call, press the
Transfer
soft
key.
2. The caller on hold will hear Music or
Message on hold if enabled on your
system.
3. Dial the
number you want to transfer
the call to and then press the
Dial
soft
key.
4. When the called party answers
announce the call.
5. Press the
Transfer
soft key to
complete the transfer.
CALL FORWARDING
To enable call forwarding:
1. Press the
Forward
soft key from the
phone’s idle display. A tone will be
heard.
2. Enter the number required.
3. Press the
Dial
soft key to invoke the
feature. You will hear 3 beeps as
confirmation.
4. A
Call Forwarded
message will
appear in the phone display.
To disable call forwarding:
1. Press the
Clr Fwd
soft key.
Use the Star2Star Find-Me / Follow-Me
feature found in the Star2Star Web
Portal Individual Phone Settings
section.
Follow Me (Immediate)
Find Me (Sequential
Find Me (All)
.
REDIAL
1. Press the
Redial
soft key and use
the navigation arrows to select the
desired number from the Place Call list.
2. Lift the handset or press the
Dial
soft
key.
