Star AsuraCPRNT, Руководство по настройке

Страница: 4 / 15

Configure
1. Configure
Using the “Configure” application, you can view and change the AsuraCPRNT settings.
Please refer to the following sections for an explanation of the options.
Setting Option Items
Please refer to the following for setting option details:
1. About
Displays information about the unit listed below.

Ethernet IP Address

Printer Firmware

Operating System

Mechanism Status

SDK Information
2. Admin Options
View and change the settings related to the below listed Administrator Options.

Display admin menu on button press

Required button hold time (seconds)

Require security pin

Security pin
3. Boot Options
View and change the settings related to the below listed Boot Options.
 Startup Application

Calibrate on next boot (*)

Display Mouse Pointe
*: Only use this function if you wish to recalibrate the touch screen. After
loading, a [+] target will appear on the display in the upper left, upper right,
lower right, lower left, and center in that order. Using a pen (or similar-sized
object) touch the points. After finishing the center target, the AsuraCPRNT
will automatically reset and the calibration will be applied.
Star Micronics Copyright 2013-2015
1