Page 1
8-Series PVS Install Instructions
Applies to: 8-Series PVS
This document contains the procedure for installing the 8-Series PVS onto Star Trac and Stairmaster
8-Series cardio equipment.
Tools Required:
• Phillips Screwdriver
• 5mm Allen Key
1. Use a Phillips screwdriver to remove the screws
securing the front of the console to the console
rear shroud. Take note of console connections,
disconnect wiring from mast to console, and
remove console front.
TIP: Use a cell phone to take a picture of the
connections before removing them.
2. Use a Phillips screwdriver to remove the two (2)
screws securing the top cover to the upper inside
rear shroud, then remove the top cover. Save the
screws for use in connecting the new PVS top
cover in Step 4.
3. Slide the console top cover onto the PVS bracket.
